esphome-emporia-vue-utility/legacy/vue-utility-solar.yaml

##################################################
# Config for homes with solar or wind production #
##################################################

esphome:
    name: vue-utility
    platform: ESP32
    board: esp-wrover-kit
    includes:
        - emporia_vue_utility.h

# Add your own wifi credentials
wifi:
    ssid: !secret wifi_ssid
    password: !secret wifi_password

ota:

logger:
    logs:
        # Change to DEBUG / INFO / WARN / ERROR as desired
        Vue: DEBUG

api:

mqtt:
    broker: !secret mqtt_broker
    id: vue_utility
    username: !secret mqtt_username
    password: !secret mqtt_password
    discovery: False # Only if you use the HA API usually

# This uart connects to the MGM111
uart:
    id: emporia_uart
    rx_pin: GPIO21
    tx_pin: GPIO22
    baud_rate: 115200

sensor:
    - platform: custom
      lambda: |-
        auto vue = new EmporiaVueUtility(id(emporia_uart));
        App.register_component(vue);
        return {vue->kWh_consumed, vue->kWh_returned, vue->W_consumed, vue->W_returned, vue->W, vue->kWh_net};
      sensors:
          - name: "kWh Consumed"
            id: kWh_consumed
            unit_of_measurement: "kWh"
            accuracy_decimals: 3
            state_class: total_increasing
            device_class: energy
            # Reduce the rate of reporting the value to
            # once every 5 minutes and/or when 0.1 kwh
            # have been consumed, unless the fast_reporting
            # button has been pushed
            filters:
                - or:
                    - throttle: 5min
                    - delta: 0.1 # <- kWh
                    - lambda: |-
                        if (id(fast_reporting)) return(x);
                        return {};
            on_raw_value:
                then:
                    lambda: |-
                        ESP_LOGI("Vue", "kWh = %0.3f", x);

          - name: "kWh Returned"
            id: kWh_returned
            unit_of_measurement: "kWh"
            accuracy_decimals: 3
            state_class: total_increasing
            device_class: energy
            # Reduce the rate of reporting the value to
            # once every 5 minutes and/or when 0.1 kwh
            # have been returned, unless the fast_reporting
            # button has been pushed
            filters:
                - or:
                    - throttle: 5min
                    - delta: 0.1 # <- kWh
                    - lambda: |-
                        if (id(fast_reporting)) return(x);
                        return {};
            on_raw_value:
                then:
                    lambda: |-
                        ESP_LOGI("Vue", "kWh = %0.3f", x);

          - name: "Watts consumed"
            id: watts_consumed
            unit_of_measurement: "W"
            accuracy_decimals: 0
            state_class: measurement
            device_class: power
            # Report every 5 minutes or when +/- 20 watts
            filters:
                - or:
                    - throttle: 5min
                    - delta: 20  # <- watts
                    - lambda: |-
                        if (id(fast_reporting)) return(x);
                        return {};
            on_raw_value:
                then:
                    lambda: |-
                        ESP_LOGI("Vue", "Watts consumed = %0.3f", x);

          - name: "Watts returned"
            id: watts_returned
            unit_of_measurement: "W"
            accuracy_decimals: 0
            state_class: measurement
            device_class: power
            # Report every 5 minutes or when +/- 20 watts
            filters:
                - or:
                    - throttle: 5min
                    - delta: 20  # <- watts
                    - lambda: |-
                        if (id(fast_reporting)) return(x);
                        return {};
            on_raw_value:
                then:
                    lambda: |-
                        ESP_LOGI("Vue", "Watts returned = %0.3f", x);

          - name: "Watts"
            id: watts
            unit_of_measurement: "W"
            accuracy_decimals: 0
            state_class: measurement
            device_class: power
            # Report every 5 minutes or when +/- 20 watts
            filters:
                - or:
                    - throttle: 5min
                    - delta: 20  # <- watts
                    - lambda: |-
                        if (id(fast_reporting)) return(x);
                        return {};
            on_raw_value:
                then:
                    lambda: |-
                        ESP_LOGI("Vue", "Watts = %0.3f", x);

          - name: "kWh Net"
            id: kWh_net
            unit_of_measurement: "kWh"
            accuracy_decimals: 3
            device_class: energy
            # Reduce the rate of reporting the value to
            # once every 5 minutes and/or when 0.1 kwh
            # have been consumed or returned, unless the fast_reporting
            # button has been pushed
            filters:
                - or:
                    - throttle: 5min
                    - delta: 0.1 # <- kWh
                    - lambda: |-
                        if (id(fast_reporting)) return(x);
                        return {};
            on_raw_value:
                then:
                    lambda: |-
                        ESP_LOGI("Vue", "kWh = %0.3f", x);


# This gives you a button that temporarily causes results to be
# reported every few seconds instead of on significant change
# and/or every 5 minutes
button:
    - platform: template
      name: "Fast Reporting"
      id: fast_reporting_button
      on_press:
        - lambda: id(fast_reporting) = true;
        - delay: 5min
        - lambda: id(fast_reporting) = false;

# Global value for above button
globals:
    - id: fast_reporting
      type: bool
      restore_value: no
      initial_value: "false"

# This LED is marked D3 on the pcb and is the power led on the case
status_led:
    pin:
        number: GPIO25
        # It *is* inverted, but being normally on looks better
        inverted: false