diff --git a/esphome/components/hlw8012/hlw8012.cpp b/esphome/components/hlw8012/hlw8012.cpp
index 73696bd2a5..70a05e4f72 100644
--- a/esphome/components/hlw8012/hlw8012.cpp
+++ b/esphome/components/hlw8012/hlw8012.cpp
@@ -34,9 +34,9 @@ void HLW8012Component::setup() {
 }
 void HLW8012Component::dump_config() {
   ESP_LOGCONFIG(TAG, "HLW8012:");
-  LOG_PIN("  SEL Pin: ", this->sel_pin_)
-  LOG_PIN("  CF Pin: ", this->cf_pin_)
-  LOG_PIN("  CF1 Pin: ", this->cf1_pin_)
+  LOG_PIN("  SEL Pin: ", this->sel_pin_);
+  LOG_PIN("  CF Pin: ", this->cf_pin_);
+  LOG_PIN("  CF1 Pin: ", this->cf1_pin_);
   ESP_LOGCONFIG(TAG,
                 "  Change measurement mode every %" PRIu32 "\n"
                 "  Current resistor: %.1f mΩ\n"
diff --git a/esphome/components/spi/spi.cpp b/esphome/components/spi/spi.cpp
index c4876d1a74..36344a6d38 100644
--- a/esphome/components/spi/spi.cpp
+++ b/esphome/components/spi/spi.cpp
@@ -64,9 +64,9 @@ void SPIComponent::setup() {
 
 void SPIComponent::dump_config() {
   ESP_LOGCONFIG(TAG, "SPI bus:");
-  LOG_PIN("  CLK Pin: ", this->clk_pin_)
-  LOG_PIN("  SDI Pin: ", this->sdi_pin_)
-  LOG_PIN("  SDO Pin: ", this->sdo_pin_)
+  LOG_PIN("  CLK Pin: ", this->clk_pin_);
+  LOG_PIN("  SDI Pin: ", this->sdi_pin_);
+  LOG_PIN("  SDO Pin: ", this->sdo_pin_);
   for (size_t i = 0; i != this->data_pins_.size(); i++) {
     ESP_LOGCONFIG(TAG, "  Data pin %u: GPIO%d", i, this->data_pins_[i]);
   }
diff --git a/esphome/components/waveshare_epaper/waveshare_213v3.cpp b/esphome/components/waveshare_epaper/waveshare_213v3.cpp
index 068cb91d31..b55f3c8d26 100644
--- a/esphome/components/waveshare_epaper/waveshare_213v3.cpp
+++ b/esphome/components/waveshare_epaper/waveshare_213v3.cpp
@@ -177,10 +177,10 @@ uint32_t WaveshareEPaper2P13InV3::idle_timeout_() { return 5000; }
 void WaveshareEPaper2P13InV3::dump_config() {
   LOG_DISPLAY("", "Waveshare E-Paper", this)
   ESP_LOGCONFIG(TAG, "  Model: 2.13inV3");
-  LOG_PIN("  CS Pin: ", this->cs_)
-  LOG_PIN("  Reset Pin: ", this->reset_pin_)
-  LOG_PIN("  DC Pin: ", this->dc_pin_)
-  LOG_PIN("  Busy Pin: ", this->busy_pin_)
+  LOG_PIN("  CS Pin: ", this->cs_);
+  LOG_PIN("  Reset Pin: ", this->reset_pin_);
+  LOG_PIN("  DC Pin: ", this->dc_pin_);
+  LOG_PIN("  Busy Pin: ", this->busy_pin_);
   LOG_UPDATE_INTERVAL(this);
 }