# Ref: https://next.esphome.io/guides/creators/?highlight=dashboard_import
# Waveshare ESP32-S3-Zero used as a bluetooth beacon proxy
# TODO: Need to geenrate a unique minor number for the bluetooth

substitutions:
  name: "project-template"
  #friendly_name: "Project Template"
  ibeacon_minor_number: 65535
  #wifi_ap_password: "CHANGE-ME-INSECURE-PASSWORD-e7bMQb9hDbVmUT3U"

packgaes:
  esphome_templates_dlitz:
    url: https://gitea.dlitz.net/scratch/esphome-templates-dlitz
    ref: main
    files:
      - "waveshare-esp32-s3-zero_btproxy.yaml"
    refresh: id


dashboard_import:
  package_import_url: https://gitea.dlitz.net/scratch/esphome-templates-dlitz.git/waveshare-esp32-s3-zero_btproxy.yaml
  import_full_config: false

esphome:
  name: "${name}"
  name_add_mac_suffix: true
  #friendly_name: "${friendly_name}"
  #project:
  #  name: "${project_name}"
  #  version: "${project_version}"

# Board: Waveshare ESP32-S3-Zero
# Chip: ESP32-S3FH4R2
# CPU speed: 240MHz
# Flash: 4MB
# PSRAM: 2MB, Quad, 80MHz
esp32:
  variant: esp32s3
  flash_size: 4MB
  cpu_frequency: 240MHz
  framework:
    type: esp-idf

psram:
  speed: 80MHz

# Enable logging
logger:
  level: DEBUG

# Enable Home Assistant API
api:

ota:
  - platform: esphome

wifi:
  #ssid: !secret wifi_ssid
  #password: !secret wifi_password
  fast_connect: true
  enable_btm: true
  enable_rrm: true

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${friendly_name} fallback"
    #password: "${wifi_ap_password}"

captive_portal:

network:
  enable_ipv6: true
  min_ipv6_addr_count: 2

safe_mode:
  reboot_timeout: 10min

esp32_ble_tracker:

bluetooth_proxy:
  active: true

esp32_ble_beacon:
  type: iBeacon
  uuid: 'c3c4fcfa-de20-44d5-98e3-686f2dc47875'
  major: 10159
  minor: "${ibeacon_minor_number}"
  #measured_power: -51


# "Buttons" created in home-assistant
button:
  - platform: restart
    id: button_restart
    name: Restart

  - platform: safe_mode
    id: button_safe_mode
    name: Safe Mode Boot

#  - platform: factory_reset
#    id: factory_reset_btn
#    name: Factory reset

binary_sensor:
  - platform: gpio
    name: "BOOT button"
    entity_category: diagnostic
    pin:
      number: GPIO0
      mode:
        input: true
        pullup: true
      inverted: true
    filters:
      - delayed_on: 10ms
      - delayed_off: 10ms
    on_click:
      - button.press: button_safe_mode

light:
  - platform: esp32_rmt_led_strip
    id: rgb_led
    name: RGB LED
    #entity_category: config
    pin: GPIO21
    rgb_order: RGB
    chipset: WS2812
    num_leds: 1
    restore_mode: ALWAYS_ON
    initial_state:    # XXX This doesn't seem to work for some rason
      state: true
      red: 0%
      green: 100%
      blue: 0%
      brightness: 30%
    effects:
      - strobe:
      - strobe:
          name: Identify
          colors:
            - state: true
              brightness: 30%
              red: 0%
              green: 0%
              blue: 100%
              duration: 250ms
            - state: true
              brightness: 100%
              red: 0%
              green: 0%
              blue: 100%
              duration: 250ms
            - state: true
              brightness: 100%
              red: 0%
              green: 100%
              blue: 100%
              duration: 250ms
            - state: true
              brightness: 30%
              red: 0%
              green: 100%
              blue: 100%
              duration: 250ms

  - platform: status_led
    internal: true
    id: status_led_id
    output: status_led_output

output:
  - platform: template
    id: status_led_output
    type: binary
    write_action:
      - lambda: |-
          static int prev_state = -1;
          //ESP_LOGD("my_status", "prev_state: %d, state: %d, state size: %d", prev_state, (int)state, sizeof(state));
          if (prev_state <= 0 && state > 0) {
            prev_state = state;
            auto call = id(rgb_led).turn_on();
            call.set_brightness(0.30);
            call.set_rgb(1.0, 0.0, 0.0);    // red
            call.set_transition_length(0);
            call.set_publish(false);    // Don't spam the logs
            call.perform();
          } else if (prev_state > 0 && state == 0) {
            prev_state = state;
            auto call = id(rgb_led).make_call();
            call.from_light_color_values(id(rgb_led).remote_values);
            call.set_transition_length(0);
            call.set_publish(false);    // Don't spam the logs
            call.perform();
          }

switch:
  - platform: template
    name: Identify
    entity_category: config
    optimistic: true
    turn_on_action:
      - light.turn_on:
          id: rgb_led
          effect: Identify
      - logger.log:
          format: "identify ON"
          level: INFO
    turn_off_action:
      - light.turn_off:
          id: rgb_led
      - logger.log:
          format: "identify OFF"
          level: INFO

  - platform: template
    id: trig_warning
    name: Trigger warning
    entity_category: diagnostic
    disabled_by_default: true
    optimistic: true
    turn_on_action:
      - lambda: |-
          id(trig_warning).status_set_warning("foo");
    turn_off_action:
      - lambda: |-
          id(trig_warning).status_clear_warning();

  - platform: template
    id: trig_error
    name: Trigger error
    entity_category: diagnostic
    disabled_by_default: true
    optimistic: true
    turn_on_action:
      - lambda: |-
          id(trig_error).status_set_error("foo");
    turn_off_action:
      - lambda: |-
          id(trig_error).status_clear_error();

  #- platform: color_status_led
  #  name: Color Status LED

sensor:
  - platform: uptime
    type: seconds
    name: Uptime

  #- platform: template
  #  name: App state (uint8)
  #  lambda: |-
  #    return App.get_app_state();
  #  update_interval: 1s