diff --git a/SUMMARY.md b/SUMMARY.md
index 697dee3..6785cae 100644
--- a/SUMMARY.md
+++ b/SUMMARY.md
@@ -9,7 +9,7 @@
 		* [Common methods](ltapi/_libre_tuya_a_p_i_8h.md)
 		* [Family-provided methods](ltapi/_libre_tuya_custom_8h.md)
 		* [Logger](ltapi/lt__logger_8h.md)
-		* [Chip types & UF2 families](ltapi/_chip_type_8h.md)
+		* [Chip & family IDs](ltapi/_chip_type_8h.md)
 		* [POSIX utilities](ltapi/lt__posix__api_8h.md)
 	* Common API
 		* [Flash](ltapi/class_i_flash_class.md)
diff --git a/docs/platform/realtek/debugging.md b/docs/platform/realtek/debugging.md
index 4ff531a..78671ff 100644
--- a/docs/platform/realtek/debugging.md
+++ b/docs/platform/realtek/debugging.md
@@ -5,6 +5,7 @@ Debugging of Realtek Ameba chips is possible and was tested with OpenOCD running
 *(the following is applicable to Arduino framework, and was not tested with SDK framework)*
 
 LibreTuya has ready-to-use OpenOCD config files:
+
 - [platform/realtek-ambz/openocd/amebaz.cfg](../../../platform/realtek-ambz/openocd/amebaz.cfg)
 
 ## Local debugger
@@ -22,7 +23,18 @@ Using a Raspberry Pi is probably the easiest option (and cheapest, as everyone h
 
 Connect your Realtek board to your Pi, as per [Programming Microcontrollers using OpenOCD on a Raspberry Pi](https://learn.adafruit.com/programming-microcontrollers-using-openocd-on-raspberry-pi).
 
-TL;DR: Install OpenOCD. Conenct A14 to GPIO23, A15 to GPIO22. Remember to join GND together. Refer to [boards/](../../../boards/) for pinouts.
+Check out [RPi BCM2711 GPIOs](https://elinux.org/RPi_BCM2711_GPIOs) to read more about BCM pin mappings.
+
+TL;DR: Install OpenOCD. Conenct A14 to BCM GPIO#11, A15 to BCM GPIO#25. Remember to join GND together. Refer to [boards/](../../../boards/) for pinouts.
+
+!!! note
+    On Raspberry Pi 4, additional config might be needed:
+    ```
+    bcm2835gpio peripheral_base 0xFE000000
+    bcm2835gpio speed_coeffs 236181 60
+    ```
+    Save the lines to a .cfg file, and pass it to OpenOCD using `-f file.cfg`.
+    Read more [here](https://forums.raspberrypi.com/viewtopic.php?p=1541631&sid=915e8d039f24301b85c060318a44b7f0#p1541631).
 
 Start OpenOCD like this (you also need your config file in the working directory):
 ```shell
diff --git a/mkdocs.yml b/mkdocs.yml
index eea2731..8dcc308 100644
--- a/mkdocs.yml
+++ b/mkdocs.yml
@@ -30,3 +30,9 @@ plugins:
 
 markdown_extensions:
   - md_in_html
+  - admonition
+  - pymdownx.highlight:
+      anchor_linenums: true
+  - pymdownx.inlinehilite
+  - pymdownx.details
+  - pymdownx.superfences