[lightning-ln882h] Add support for Lightning LN882H family (#312)

* fix mbedtls bad pointer in function call (prototype mismatch)

* fix issue with weak families functions implemented in static library, it will never be linked. fixed by redefining prototypes inside families

* [ln882x] add support for lightning ln882x & ln882h families

* add i2c (wire) support

* add analog (adc) support

* add watchdog support

* [ln882x] changed default uart 0/1 pins; added board wl2s

* [ln882x] fix IRQ & ADC pins

* [ln882x] boards cosmetic

* [ln882x] wifi sta use otp mac addr by default; re-enabled wifi powersave mode

* [ln882x] clang-format clean code

* [ln882x] clang-format clean code

* Update families.json

* Apply suggestions from code review

* [ln882x] reformat json board files

* [ln882x] os_queue cleanup

* [ln882x] removed Beken auto-download command

* [ln882x] removed personal script file

* [ln882x] removed unusefull pi section in debugging.md

* [ln882x] removed Arduino.h and changed private I2C definition

* [ln882x] updated README.md

* [ln882x] changed pin naming scheme to PA/PB

* [ln882x] clean code

* [ln882x] clean code

* [ln882x] add ota image verification

* Update push-dev.yml

* [ln882x] fix boards ADC missing inputs]

* [ln882x] removed reg_xxx fixup files and use include guards instead

* [ln882x] cleanup code

* [ln882x] cleanup code

* [ln882x] fix lt_init weak functions linking

* [ln882x] revert lt_api.h modification, fixed with previous commit

* [ln882x] setup UF2 firmware for flasher with partitions

* [ln882x] update README.md

* [ln882x] include ln_wifi.h and ln_serial.h to avoid including bad headers on case insensitive systems

* [ln882x] Replace RingBuffer by SerialRingBuffer

* [ln882x] clang-format

* [ln882x] update README.md

* Apply suggestions from code review

* Reformat board JSON files

* Add mkdocs link redirect

* Update ltchiptool to v4.12.0

---------

Co-authored-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>

boards/variants/wl2s.c

@@ -0,0 +1,54 @@
+/* This file was auto-generated from wl2s.json using boardgen */
+
+#include <Arduino.h>
+
+#ifdef LT_VARIANT_INCLUDE
+#include LT_VARIANT_INCLUDE
+#endif
+
+// clang-format off
+PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
+	// D0: PA07, SD_D3, I2S0_RX, I2C0_SCL, I2C0_SDA
+	{PA_7,  PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO,           PIN_NONE, 0},
+	// D1: PA12, I2C0_SCL, I2C0_SDA
+	{PA_12, PIN_I2C | PIN_GPIO,                               PIN_NONE, 0},
+	// D2: PA03, UART0_RX, I2C0_SCL, I2C0_SDA
+	{PA_3,  PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO,          PIN_NONE, 0},
+	// D3: PA10, SD_D0, I2S0_TX, I2C0_SCL, I2C0_SDA
+	{PA_10, PIN_I2S | PIN_I2C | PIN_GPIO,                     PIN_NONE, 0},
+	// D4: PA02, UART0_TX, I2C0_SCL, I2C0_SDA
+	{PA_2,  PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO,          PIN_NONE, 0},
+	// D5: PA00, ADC2, I2C0_SCL, I2C0_SDA
+	{PA_0,  PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO,           PIN_NONE, 0},
+	// D6: PB03, ADC5, I2C0_SCL, I2C0_SDA
+	{PB_3,  PIN_I2C | PIN_ADC | PIN_GPIO,                     PIN_NONE, 0},
+	// D7: PA11, SD_D1, I2C0_SCL, I2C0_SDA
+	{PA_11, PIN_I2C | PIN_GPIO,                               PIN_NONE, 0},
+	// D8: PA09, BOOT1, SD_CLK, I2S0_SCLK, I2C0_SCL, I2C0_SDA
+	{PA_9,  PIN_I2S | PIN_I2C | PIN_GPIO,                     PIN_NONE, 0},
+	// D9: PB08, UART1_RX, I2C0_SCL, I2C0_SDA
+	{PB_8,  PIN_UART | PIN_I2C | PIN_GPIO,                    PIN_NONE, 0},
+	// D10: PB09, UART1_TX, I2C0_SCL, I2C0_SDA
+	{PB_9,  PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO,          PIN_NONE, 0},
+	// D11: PA05, I2C0_SCL, I2C0_SDA
+	{PA_5,  PIN_I2C | PIN_IRQ | PIN_GPIO,                     PIN_NONE, 0},
+	// D12: PA01, ADC3, SWDIO, I2C0_SCL, I2C0_SDA
+	{PA_1,  PIN_SWD | PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
+};
+
+PinInfo *lt_arduino_pin_gpio_map[] = {
+	[0]  = &(lt_arduino_pin_info_list[5]),  // PA_0 (D5)
+	[1]  = &(lt_arduino_pin_info_list[12]), // PA_1 (D12)
+	[2]  = &(lt_arduino_pin_info_list[4]),  // PA_2 (D4)
+	[3]  = &(lt_arduino_pin_info_list[2]),  // PA_3 (D2)
+	[5]  = &(lt_arduino_pin_info_list[11]), // PA_5 (D11)
+	[7]  = &(lt_arduino_pin_info_list[0]),  // PA_7 (D0)
+	[9]  = &(lt_arduino_pin_info_list[8]),  // PA_9 (D8)
+	[10] = &(lt_arduino_pin_info_list[3]),  // PA_10 (D3)
+	[11] = &(lt_arduino_pin_info_list[7]),  // PA_11 (D7)
+	[12] = &(lt_arduino_pin_info_list[1]),  // PA_12 (D1)
+	[19] = &(lt_arduino_pin_info_list[6]),  // PB_3 (D6)
+	[24] = &(lt_arduino_pin_info_list[9]),  // PB_8 (D9)
+	[25] = &(lt_arduino_pin_info_list[10]), // PB_9 (D10)
+};
+// clang-format on