895b6e89c5
* fix interrupt handling for the ln882h - all GPIOS can generate interrupts - added calls to NVIC_SetPriority/NVIC_EnableIRQ/NVIC_DisableIRQ * fix clang formatting error * only call NVIC_DisableIRQ if no other gpio is using an interrupt * fix (again) clang-format errors * add IRQ capability on all pins * don't bother with NVIC_DisableIRQ * use pin->gpio instead of interruptNumber, use macro GPIO_GET_PORT for clarity * Mark interrupts as supported for the LN882H --------- Co-authored-by: lamauny <pub.elc@free.fr>
76 lines
3.6 KiB
C
76 lines
3.6 KiB
C
/* This file was auto-generated from generic-ln882hki.json using boardgen */
|
|
|
|
#include <Arduino.h>
|
|
|
|
#ifdef LT_VARIANT_INCLUDE
|
|
#include LT_VARIANT_INCLUDE
|
|
#endif
|
|
|
|
// clang-format off
|
|
PinInfo lt_arduino_pin_info_list[PINS_COUNT] = {
|
|
// D0: PA00, ADC2, I2C0_SCL, I2C0_SDA
|
|
{PA_0, PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D1: PA01, ADC3, SWDIO, I2C0_SCL, I2C0_SDA
|
|
{PA_1, PIN_SWD | PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D2: PA02, UART0_TX, I2C0_SCL, I2C0_SDA
|
|
{PA_2, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D3: PA03, UART0_RX, I2C0_SCL, I2C0_SDA
|
|
{PA_3, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D4: PA04, ADC4, SWCLK, I2C0_SCL, I2C0_SDA
|
|
{PA_4, PIN_SWD | PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D5: PA05, I2C0_SCL, I2C0_SDA
|
|
{PA_5, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D6: PA06, SD_D2, I2C0_SCL, I2C0_SDA
|
|
{PA_6, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D7: PA07, SD_D3, I2S0_RX, I2C0_SCL, I2C0_SDA
|
|
{PA_7, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D8: PA08, BOOT0, SD_CMD, I2S0_WS, I2C0_SCL, I2C0_SDA
|
|
{PA_8, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D9: PA09, BOOT1, SD_CLK, I2S0_SCLK, I2C0_SCL, I2C0_SDA
|
|
{PA_9, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D10: PA10, SD_D0, I2S0_TX, I2C0_SCL, I2C0_SDA
|
|
{PA_10, PIN_I2S | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D11: PA11, SD_D1, I2C0_SCL, I2C0_SDA
|
|
{PA_11, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D12: PA12, I2C0_SCL, I2C0_SDA
|
|
{PA_12, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D13: PB03, ADC5, I2C0_SCL, I2C0_SDA
|
|
{PB_3, PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D14: PB04, ADC6, I2C0_SCL, I2C0_SDA
|
|
{PB_4, PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D15: PB05, ADC7, I2C0_SCL, I2C0_SDA
|
|
{PB_5, PIN_I2C | PIN_ADC | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D16: PB06, I2C0_SCL, I2C0_SDA
|
|
{PB_6, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D17: PB07, I2C0_SCL, I2C0_SDA
|
|
{PB_7, PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D18: PB08, UART1_RX, I2C0_SCL, I2C0_SDA
|
|
{PB_8, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
// D19: PB09, UART1_TX, I2C0_SCL, I2C0_SDA
|
|
{PB_9, PIN_UART | PIN_I2C | PIN_IRQ | PIN_GPIO, PIN_NONE, 0},
|
|
};
|
|
|
|
PinInfo *lt_arduino_pin_gpio_map[] = {
|
|
[0] = &(lt_arduino_pin_info_list[0]), // PA_0 (D0)
|
|
[1] = &(lt_arduino_pin_info_list[1]), // PA_1 (D1)
|
|
[2] = &(lt_arduino_pin_info_list[2]), // PA_2 (D2)
|
|
[3] = &(lt_arduino_pin_info_list[3]), // PA_3 (D3)
|
|
[4] = &(lt_arduino_pin_info_list[4]), // PA_4 (D4)
|
|
[5] = &(lt_arduino_pin_info_list[5]), // PA_5 (D5)
|
|
[6] = &(lt_arduino_pin_info_list[6]), // PA_6 (D6)
|
|
[7] = &(lt_arduino_pin_info_list[7]), // PA_7 (D7)
|
|
[8] = &(lt_arduino_pin_info_list[8]), // PA_8 (D8)
|
|
[9] = &(lt_arduino_pin_info_list[9]), // PA_9 (D9)
|
|
[10] = &(lt_arduino_pin_info_list[10]), // PA_10 (D10)
|
|
[11] = &(lt_arduino_pin_info_list[11]), // PA_11 (D11)
|
|
[12] = &(lt_arduino_pin_info_list[12]), // PA_12 (D12)
|
|
[19] = &(lt_arduino_pin_info_list[13]), // PB_3 (D13)
|
|
[20] = &(lt_arduino_pin_info_list[14]), // PB_4 (D14)
|
|
[21] = &(lt_arduino_pin_info_list[15]), // PB_5 (D15)
|
|
[22] = &(lt_arduino_pin_info_list[16]), // PB_6 (D16)
|
|
[23] = &(lt_arduino_pin_info_list[17]), // PB_7 (D17)
|
|
[24] = &(lt_arduino_pin_info_list[18]), // PB_8 (D18)
|
|
[25] = &(lt_arduino_pin_info_list[19]), // PB_9 (D19)
|
|
};
|
|
// clang-format on
|