mirror of
https://github.com/86Box/docs.git
synced 2026-02-22 09:35:33 -07:00
35 lines
1.3 KiB
ReStructuredText
35 lines
1.3 KiB
ReStructuredText
.. include:: /include.rst
|
|
|
|
|network| Network
|
|
=================
|
|
|
|
The **Network** page contains settings related to the emulated machine's network connectivity.
|
|
|
|
Network Interface Controllers
|
|
-----------------------------
|
|
|
|
Network interface cards to emulate. Up to 4 independent network cards are supported.
|
|
|
|
Mode
|
|
^^^^
|
|
|
|
Network emulation mode to use on this card. See :doc:`../hardware/network` for more information on these.
|
|
|
|
* **None:** disable networking.
|
|
* **PCap:** connects directly to a host network adapter. Similar to the **Bridge** mode on other emulators and virtualizers.
|
|
* **SLiRP:** creates a private network with a virtual router. Similar to the **NAT** mode on other emulators and virtualizers.
|
|
|
|
Interface
|
|
^^^^^^^^^
|
|
|
|
Host network adapter to use for PCap mode on this card. If no adapters appear in this list, make sure PCap is :ref:`enabled on your host and a supported network connection is present <hardware/network:PCap>`.
|
|
|
|
Adapter
|
|
^^^^^^^
|
|
|
|
Network card to emulate. Only cards supported by the machine's expansion buses will be listed.
|
|
|
|
The *Configure* button opens a new window with settings specific to the selected network card, such as the I/O port and IRQ for ISA cards.
|
|
|
|
The **[LPT] Parallel Port Internet Protocol** network adapter requires a **PLIP Network** device to be attached to a :ref:`parallel port <settings/ports:Parallel port 1-4>`.
|