[micronova] Add FINAL_VALIDATE_SCHEMA to validate uart (#12350)

Co-authored-by: Jonathan Swoboda <154711427+swoboda1337@users.noreply.github.com>

esphome/components/micronova/__init__.py

@@ -8,13 +8,14 @@ CODEOWNERS = ["@jorre05", "@edenhaus"]
 
 DEPENDENCIES = ["uart"]
 
-CONF_MICRONOVA_ID = "micronova_id"
+DOMAIN = "micronova"
+CONF_MICRONOVA_ID = f"{DOMAIN}_id"
 CONF_ENABLE_RX_PIN = "enable_rx_pin"
 CONF_MEMORY_LOCATION = "memory_location"
 CONF_MEMORY_ADDRESS = "memory_address"
 DEFAULT_POLLING_INTERVAL = "60s"
 
-micronova_ns = cg.esphome_ns.namespace("micronova")
+micronova_ns = cg.esphome_ns.namespace(DOMAIN)
 
 MicroNovaFunctions = micronova_ns.enum("MicroNovaFunctions", is_class=True)
 MICRONOVA_FUNCTIONS_ENUM = {
@@ -42,6 +43,16 @@ CONFIG_SCHEMA = cv.Schema(
     }
 ).extend(uart.UART_DEVICE_SCHEMA)
 
+FINAL_VALIDATE_SCHEMA = uart.final_validate_device_schema(
+    DOMAIN,
+    baud_rate=1200,
+    require_rx=True,
+    require_tx=True,
+    data_bits=8,
+    parity="NONE",
+    stop_bits=2,
+)
+
 
 def MICRONOVA_ADDRESS_SCHEMA(
     *,

tests/components/micronova/test.esp32-idf.yaml

@@ -2,6 +2,6 @@ substitutions:
   enable_rx_pin: GPIO13
 
 packages:
-  uart: !include ../../test_build_components/common/uart/esp32-idf.yaml
+  uart: !include ../../test_build_components/common/uart_1200_none_2stopbits/esp32-idf.yaml
 
 <<: !include common.yaml

tests/components/micronova/test.esp8266-ard.yaml

@@ -2,6 +2,6 @@ substitutions:
   enable_rx_pin: GPIO15
 
 packages:
-  uart: !include ../../test_build_components/common/uart/esp8266-ard.yaml
+  uart: !include ../../test_build_components/common/uart_1200_none_2stopbits/esp8266-ard.yaml
 
 <<: !include common.yaml

tests/components/micronova/test.rp2040-ard.yaml

@@ -2,6 +2,6 @@ substitutions:
   enable_rx_pin: GPIO3
 
 packages:
-  uart: !include ../../test_build_components/common/uart/rp2040-ard.yaml
+  uart: !include ../../test_build_components/common/uart_1200_none_2stopbits/rp2040-ard.yaml
 
 <<: !include common.yaml

tests/test_build_components/common/uart_1200_none_2stopbits/esp32-ard.yaml

@@ -0,0 +1,13 @@
+# Common UART configuration for ESP32 Arduino tests - 1200 baud NONE parity 2 stop bits
+
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: NONE
+    stop_bits: 2

tests/test_build_components/common/uart_1200_none_2stopbits/esp32-c3-ard.yaml

@@ -0,0 +1,13 @@
+# Common UART configuration for ESP32-C3 Arduino tests - 1200 baud NONE parity 2 stop bits
+
+substitutions:
+  tx_pin: GPIO20
+  rx_pin: GPIO21
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: NONE
+    stop_bits: 2

tests/test_build_components/common/uart_1200_none_2stopbits/esp32-c3-idf.yaml

@@ -0,0 +1,13 @@
+# Common UART configuration for ESP32-C3 IDF tests - 1200 baud NONE parity 2 stop bits
+
+substitutions:
+  tx_pin: GPIO20
+  rx_pin: GPIO21
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: NONE
+    stop_bits: 2

tests/test_build_components/common/uart_1200_none_2stopbits/esp32-idf.yaml

@@ -0,0 +1,13 @@
+# Common UART configuration for ESP32 IDF tests - 1200 baud NONE parity 2 stop bits
+
+substitutions:
+  tx_pin: GPIO17
+  rx_pin: GPIO16
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: NONE
+    stop_bits: 2

tests/test_build_components/common/uart_1200_none_2stopbits/esp8266-ard.yaml

@@ -0,0 +1,13 @@
+# Common UART configuration for ESP8266 Arduino tests - 1200 baud NONE parity 2 stop bits
+
+substitutions:
+  tx_pin: GPIO4
+  rx_pin: GPIO5
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: NONE
+    stop_bits: 2

tests/test_build_components/common/uart_1200_none_2stopbits/rp2040-ard.yaml

@@ -0,0 +1,13 @@
+# Common UART configuration for RP2040 Arduino tests - 1200 baud NONE parity 2 stop bits
+
+substitutions:
+  tx_pin: GPIO0
+  rx_pin: GPIO1
+
+uart:
+  - id: uart_bus
+    tx_pin: ${tx_pin}
+    rx_pin: ${rx_pin}
+    baud_rate: 1200
+    parity: NONE
+    stop_bits: 2