99 lines
3.3 KiB
Markdown
99 lines
3.3 KiB
Markdown
# LSC LMA35 BK7231T
|
|
|
|
*by Unknown*
|
|
|
|
[Product page](https://www.action.com/de-at/p/lsc-smart-connect-outdoor-led-streifen/)
|
|
|
|
- [General info](../../docs/platform/beken-72xx/README.md)
|
|
- [Flashing guide](../../docs/platform/beken-72xx/flashing.md)
|
|
|
|
Parameter | Value
|
|
-------------|----------------------------------
|
|
Board code | `lsc-lma35-t`
|
|
MCU | BK7231T
|
|
Manufacturer | Beken
|
|
Series | BK72XX
|
|
Frequency | 120 MHz
|
|
Flash size | 2 MiB
|
|
RAM size | 256 KiB
|
|
Voltage | 3.0V - 3.6V
|
|
I/O | 15x GPIO, 6x PWM, 2x UART, 1x ADC
|
|
Wi-Fi | 802.11 b/g/n
|
|
Bluetooth | BLE v4.2
|
|
|
|
## Usage
|
|
|
|
**Board code:** `lsc-lma35-t`
|
|
|
|
In `platformio.ini`:
|
|
|
|
```ini
|
|
[env:lsc-lma35-t]
|
|
platform = libretuya
|
|
board = lsc-lma35-t
|
|
framework = arduino
|
|
```
|
|
|
|
In ESPHome YAML:
|
|
|
|
```yaml
|
|
libretuya:
|
|
board: lsc-lma35-t
|
|
framework:
|
|
version: dev
|
|
```
|
|
|
|
## Pinout
|
|
|
|
|
|
|
|
## Arduino Core pin mapping
|
|
|
|
No. | Pin | UART | I²C | SPI | PWM | Other
|
|
----|-----------|----------|----------|------|------|------
|
|
D0 | P26 | | | | PWM5 |
|
|
D1 | P14 | | | SCK | |
|
|
D2 | P16 | | | MOSI | |
|
|
D3 | P24 | | | | PWM4 |
|
|
D4 | P22 | | | | | TDI
|
|
D5 | P0 | UART2_TX | I2C2_SCL | | |
|
|
D6 | P23 | | | | | TDO
|
|
D7 | P8 | | | | PWM2 |
|
|
D8 | P9 | | | | PWM3 |
|
|
D9 | P21 | | I2C1_SDA | | | TMS
|
|
D10 | P6 | | | | PWM0 |
|
|
D11 | P7 | | | | PWM1 |
|
|
D12 | P10 | UART1_RX | | | |
|
|
D13 | P11 | UART1_TX | | | |
|
|
D14 | P1 | UART2_RX | I2C2_SDA | | |
|
|
A0 | P23, ADC3 | | | | |
|
|
|
|
## Flash memory map
|
|
|
|
Flash size: 2 MiB / 2,097,152 B / 0x200000
|
|
|
|
Hex values are in bytes.
|
|
|
|
Name | Start | Length | End
|
|
----------------|----------|--------------------|---------
|
|
Bootloader | 0x000000 | 68 KiB / 0x11000 | 0x011000
|
|
App Image | 0x011000 | 1.1 MiB / 0x121000 | 0x132000
|
|
OTA Image | 0x132000 | 664 KiB / 0xA6000 | 0x1D8000
|
|
Key-Value Store | 0x1D8000 | 32 KiB / 0x8000 | 0x1E0000
|
|
Calibration | 0x1E0000 | 4 KiB / 0x1000 | 0x1E1000
|
|
TLV Store | 0x1E1000 | 4 KiB / 0x1000 | 0x1E2000
|
|
Network Data | 0x1E2000 | 4 KiB / 0x1000 | 0x1E3000
|
|
User Data | 0x1E3000 | 116 KiB / 0x1D000 | 0x200000
|
|
|
|
Bootloader and app partitions contain CRC16 sums every 32 bytes. That results in the actual flash offsets/sizes not aligned to sector boundaries. To simplify calculations, the values shown in the table (extracted from bootloader's partition table) were aligned to 4096 bytes.
|
|
|
|
## Information
|
|
|
|
This board has no marking on the front side, only something that looks like PCB manufacturing info on the back; thus it was named based on these symbols.
|
|
|
|
It can be found in 'LSC Smart Connect Outdoor LED Strip', and is likely custom-made for this product.
|
|
|
|
The pinout was established by writing to and probing consecutive GPIOs, using the generic board definition.
|
|
|
|
Pins marked with '?' are currently unknown, with a possibility of being CEN. Pin 22 (P1/D14) is also not confirmed.
|